Micromotor mi450n

Description (made in italy) Compact and handy brush micromotor that provides high performance similar to an induction handpiece and it ensures at the same time a very good value between money and quality. Equipped with high speed bearings and an effective dust mechanism.. The perfect balanced handpiece has an ergonomic and functional design. The foot power unit has auto-cruise and reverse.

434.00 €

handpiece mi450nman

Description (made in italy) Compact and handy brush micromotor that provides high performance similar to an induction handpiece and it ensures at the same time a very good value between money and quality. Equipped with high speed bearings and an effective dust mechanism.. The perfect balanced handpiece has an ergonomic and functional design. The foot power unit has auto-cruise and reverse. Only handpiece. Accessory for mi450n

169.00 €

mixer mxrt

Description (made in italy) Mixer MXRT – MXR Suitable for mixing any type of plaster, coating and silicone in air absence. They are equipped with a powerful and low-noise motor reducer, a dry running vacuum pump, a very precise electronic timer with display and buzzer stop. The mixers can be placed either on the table (T version with support MX270) or fixed to the wall (W version with wall bracket MX260) and are always supplied with a cup of 500 cc (MX210). Version MX4 has a fixed speed and unidirectional rotation. Version MXR has : – 30 automatic mixing cycles: 10 for plaster, 10 for coating and 10 for alginate. – manual cycles with pre-mix in which we can change at will the mixing times. Each program stores the times, the speed and the sense of rotation that allow the most correct mixing with an extreme simplicity of use. The CUPS, with capacity 200cc, 500cc, 1000cc, 2000cc , are made in SAN material ,stainless steel paddle and filter. It’s available a 200cc cup specific for alginate mixing (MX205) to use with MXR only.

969.00 €

mixer mx4w

Description (made in italy) Mixer MX4N – MXR Suitable for mixing any type of plaster, coating and silicone in air absence. They are equipped with a powerful and low-noise motor reducer, a dry running vacuum pump, a very precise electronic timer with display and buzzer stop. The mixers can be placed either on the table (T version with support MX270) or fixed to the wall (W version with wall bracket MX260) and are always supplied with a cup of 500 cc (MX210). Version MX4 has a fixed speed and unidirectional rotation. Version MXR has : – 30 automatic mixing cycles: 10 for plaster, 10 for coating and 10 for alginate. – manual cycles with pre-mix in which we can change at will the mixing times. Each program stores the times, the speed and the sense of rotation that allow the most correct mixing with an extreme simplicity of use. The CUPS, with capacity 200cc, 500cc, 1000cc, 2000cc , are made in SAN material ,stainless steel paddle and filter. It’s available a 200cc cup specific for alginate mixing (MX205) to use with MXR only.

709.00 €

trimmer sd easy 1200

Description (made in italy) SW1200 – SD 1200- SDEASY1200 Trimmer of new concept, created with an ergonomic and rational design. It mounts a powerful, balanced and at an angle of 10 ° motor. The body front is made in plastic material and got by injection , the back is made in metal. Reference lines with precision adjustment are engraved on the working stainless steel plate for grinding and the two large lateral supports ensure safety at work. The equipment is supplied with safety switch, solenoid valve and stopcock for water as well as outlet for the automatic operation of the suction unit. All connections are located on the back with tubes for water loading and discharge SD1200 version with diamond disc in aluminum that can work both dry connecting to the suction unit (ASX1027) that for water use by connecting to the water system through the provided pipes . SW1200 version with bakelite disc for water use by connecting to the water supply trough the provided pipes. SDEASY1200 Dry version with flexible abrasive discs in corundum, that are fasten to the support through the strap. Advantage of this equipment is the fast removal of the plaster during the squaring of the model. SDEASY 4 flexible abrasive discs in corundum

698.00 €

vibrator

Description (made in italy) Vibrator for 2 large cylinders. An electronic control device sets the vibration intensity. Thanks to its technical characteristics it’s suitable to the casting of every kind of coating. – Perfect vertical vibration through electronic continue control. – Light start switch

199.00 €

spotlight

Description (made in italy) Small and functional device for the pre polymerization of the composite coating applied before the final baking in the oven. It’s driven by a practical aluminum button placed in front and it’s equipped with a halogen 100W lamp. It reduces the processing time and it ‘suitable for all types of composite.

199.00 €

halogen lamp

halogen lamp for spotlight. 100w

29.00 €

Polymerizing Lamp for composite and resin

Description (made in italy) Device for the photopolymerization of all kinds of composites. It works at a temperature of about 45 ° C regulated by the internal cooling fan and two different setups: a) 4 Led lamps and 1 halogen lamp (150W) or b) 4 Led lamps and 2 halogen lamps (250 W) in order to reduce working times. It’s possible to exclude the halogen light to work on resin plates at 380/400 Nm. The stainless steel chamber has internal dimensions of 15×16 cm and a rotating plate guarantees the complete exposure of the product.

739.00 €